A stainless steel Services Distribution Unit is the hygienic, convenient
and flexible way of providing the cooking appliances with the gas, electric
and water services they require. Whether the cooking suite is wall or
island mounted, all the services are housed within an attractive pre-engineered
unit. Ugly exposed pipework, electrical trunking, surface mounted boxes
- the many unsightly kitchen dirt traps are neatly packaged into an easy
to maintain stainless steel housing.
For safety reasons, mechanical and electrical services are segregated,
but are easily accessible behind removable panels. Within the Unit, services
can be easily relocated or expanded in the event of relocation or revision
of appliances. There is single point connection for all services, and
controls, MCB Board and isolation valves are hidden but easily accessed.
Lighting levels at the worksurface below the canopies should be a
minimum of 500 lux. Canopies can be supplied with lighting pre-fitted.
Fluorescent: recessed vapour proof twin fittings installed within the
canopy roof are recommended.
Fluorescent: surface mounted vapour proof twin fittings housed in a stainless
steel enclosure can beprovided where the ceiling height prevents lights
from being recessed.
Incandescent: surface mounted vapour proof fittings can be fitted as an
option to either of the above.
Feature: lighting such as recessed spot lights can be fitted if required.
Nationwide Ventilation side access pre-filter housings are manufactured
from 20g galvanised sheet steel, with standard 120L MEZ at each end for
simple installation into standard ductwork runs. One side has a removable
access door, with either screwed fixings or cam catches for easy access
to the pre-filter for changing. On three internal sides there are filter-retaining
channels to slide the filter into, and prevent movement when in operation.
The channels are foam sealed on the back and on the door to eliminate
air by-pass round the filters.
The pre-filter housings can be manufactured to accommodate any thickness
of pre-filter, bag filter or multiple numbers of filters. When fitted
with pleated panel filters, grade G4 of EN779 (Medium efficiency disposable
filters), the pre-filter housings are suitable for use in ventilation/air
conditioning systems which require a higher efficiency and greater dust
holding capacity. They can also be used in the food industry and hospitals
where glass panels are undesirable. They are also suitable for use as
pre-filtration to carbon filter units.
Standard Available Sizes
- 300mm X 300mm Nominal
- 350mm X 350mm Nominal
- 400mm X 400mm Nominal
- 450mm X 450mm Nominal
- 500mm X 500mm Nominal
- 550mm X 550mm Nominal
- 600mm X 600mm Nominal
- 650mm X 650mm Nominal
- 700mm X 700mm Nominal
Non-standard sizes available on request to suit
your requirements. To use in spiral ductwork, circular spigot adaptor
faceplates can be fitted for connection. For further information or pricing
please contact a member of staff.
Nationwide Ventilation supply all types of louvres and air diffusers,
most louvres are made from aluminium with standard silver anodised finish,
but can be powder coated to match any colour required by the customers.
Most grilles can also be supplied with opposed blade dampers if required.
The grilles and louvre ranges are:
- Fixed blade weather louvres
- 4-way ceiling diffusers
- Egg crate grilles
- Multiway eyelash grilles
- Air stream operated louvres
- Double deflection grilles
- Linear grilles
- Punka louvres
- Non vision air transfer grilles
- Circular ceiling diffusers
All louvres and grilles come in a range of sizes or can be purpose made
to your requirement.
|
|
|
External to the canopy/ventilated ceiling
we offer an equally extensive product range. Stainless steel wall cladding
and Services Distribution Units housing the mechanical and electrical supplies
to the cooking appliances are an integral part of our range. In compliance
with BS6173 we offer a range of gas interlock control panels, which can
incorporate the fan controls if required. Ansul fire suppression systems
can be incorporated into any canopy or ceiling. |
|
| |
|
Stainless Steel Baffle Filters Price and Specification.
Application -
Extraction canopies in commercial catering and food preparation establishments.
Construction -
Outer Frame: Rolled stainless steel section with safety edge. Drain holes
punched in lower edge.
Baffle Plates: Rolled stainless steel section with safety edge, 90 degree
legs.
Handle: Fold down bale type.
Initial Resistance: 60 Pa @ 1.5m/second – 110 Pa @ 2m/second.
Nominal Size Inches Actual Size mm Flow Rating m3/s
10 x 20 x 2 241 x 495 x 48 0.238
16 x 20 x 2 394 x 495 x 48 0.39
16 x 16 x 2 394 x 394 x 48 0.29
20 x 16 x 2 495 x 394 x 48 0.39
20 x 20 x 2 495 x 495 x 48 0.49
18 x 18 x 2 445 x 445 x 48 0.396
Non-standard sizes available on request to suit your requirements. For
further information or pricing please contact a member of staff on the
above telephone number to discuss your requirements.
Nationwide Ventilation supply all types of filters, most of which are
held in standard stock size. But any size can be made to suit the customer’s
requirements. The filter ranges are:
- Stainless steel grease baffle filters
- Aluminium mesh grease filters
- Disposable pleated panel filters
- Active carbon panel filters
- Multi pocket general purpose bag filter
- HEPA filters
    
|
|
